View B82422H1222K000_4131146.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

SMT Inductors, SIMID Series SIMID 1210-H
B82422H
Size 1210 (EIA) or 3225 (IEC) Rated inductance 1 to 680 mH Rated current 61 to 1150 mA
Construction S Ferrite drum core S Laser-welded winding S Flame-retardant encapsulation Features S Very high current handling capability S Suitable for reflow soldering acc. JEDEC J-STD 020C S lead-free, RoHS-compatible S qualified acc. AEC-Q200 Applications S Filtering of supply voltages, coupling, decoupling S DC/DC converters / switch mode power supplies S Automotive electronics S Telecommunications Terminals S Electro-plated S Base material CuSn6 S 0,4mm Cu; 1-2mm Ag; 5-7mm Sn (lead-free) Marking Marking on component: L value (in mH) and tolerance of L value (coded) Date of manufacture (coded) Delivery mode 8mm blister tape, reel packing 180mm O reel (2000 pcs) or 330mm O reel (7500 pcs) Taping in accordance to IEC 60286-3. For details on taping and packing refer to data book "Chokes and Inductors" and to Epcos Homepage.
Please read the important notes at the end of this document
1
B82422-H1*-3-7659 28.06.2006
SMT Inductors, SIMID Series SIMID 1210-H
B82422H
Dimensional drawing
Layout recommendation
Dimensions (mm) Reflow soldering
A 2,70
B 1,15
C 1,80
D 4,40
Marking
1) Soldering area, tinned
Technical data and measuring conditions
Electrical specifications at TA = 20C
Rated inductance LR Q factor Qmin Rated current IR
Measured with impedance analyzer HP 4294A at frequency fL Measured with impedance analyzer HP 4294A at frequency fQ Maximum permissible DC with inductance decrease DL/L0 v10% and temperature increase of v45K at rated temperature of 105C Measured with network analyzer HP 8753 measuring current < IR 55/150/56 to IEC 60068-1 lead-free to IEC 60068-2-58 and Jedec J-STD 002B / JESD22-B102D to IEC 60068-2-20 and MIL-STD-202, method 210 2mm (100mm long standard PCB) Approx. 50mg
B82422-H1*-3-7659 28.06.2006
Self-resonance frequency fres,min DC resistance Rmax Climatic category Solderability Resistance to soldering heat Permissible PCB bending Weight
Please read the important notes at the end of this document
2
SMT Inductors, SIMID Series SIMID 1210-H
B82422H
Characteristics and ordering codes LR mH Core material: ferrite 1,0 1,5 2,2 3,3 4,7 6,8 10 15 22 33 47 68 100 150 220 330 470 680 "10% K "5% J "10% K 8 8 8 8 8 8 12 12 12 15 15 15 20 20 20 20 20 20 7,96 7,96 7,96 7,96 7,96 7,96 2,52 2,52 2,52 2,52 2,52 2,52 0,796 0,796 0,796 0,796 0,796 0,796 1150 900 800 770 700 570 500 390 330 280 230 180 150 120 100 90 76 61 0,10 0,14 0,16 0,18 0,25 0,35 0,46 0,72 1,00 1,40 2,10 3,40 4,80 7,50 10,90 13,00 20,00 31,00 150 110 90 70 46 35 30 26 21 15 12 10 8,0 6,0 5,5 4,5 3,5 3,0 B82422H1102K000 B82422H1152K000 B82422H1222K000 B82422H1332+000 B82422H1472+000 B82422H1682+000 B82422H1103+000 B82422H1153+000 B82422H1223+000 B82422H1333+000 B82422H1473+000 B82422H1683+000 B82422H1104+000 B82422H1154+000 B82422H1224+000 B82422H1334+000 B82422H1474+000 B82422H1684+000 Toler- ance 1) Qmin fL;fQ MHz IR mA Rmax fres,min MHz Ordering code 2) ( 180-mm reel)
1) Closer tolerances and special versions upon request. 2) Replace the + by the code letter for the required inductance tolerance.
Please read the important notes at the end of this document
3
B82422-H1*-3-7659 28.06.2006
SMT Inductors, SIMID Series SIMID 1210-H
B82422H
Q factor versus frequency f measured with Agilent 4294A
30
Current derating I op/I R versus ambient temperature TA
1,2
Q 25
Iop I R
1
680mH 100mH
20 0,8
10mH
15 0,6
1mH
10
0,4
5
0,2
0 0,1 1
0
MHz f
10
0
20
40
60
80
100
120
C
TA
160
Impedance |Z| versus frequency f measured with Agilent 4294A
100000
inductance L versus dc load current IDC measured with LCR meter Agilent 4284A
1000
680mH 100mH
680mH
|Z| 10000
10mH
L
100
100mH
mH
1mH
1000 10
10mH
100
1
1mH
10
0,1
1
10
100
MHz f
1000
0,01
0,01
0,1
1
A IDC
10
Please read the important notes at the end of this document
4
B82422-H1*-3-7659 28.06.2006
Important notes
The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of passive electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of a passive electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of a passive electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as "hazardous"). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of
the "General Terms of Delivery for Products and Services in the Electrical Industry" published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, EPCOS-JONES, Baoke, CeraDiode, CSSP, MLSC, PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMID, SIOV, SIP5D, SIP5K, UltraCap, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks.
Page 5 of 5

▲Up To Search▲

Price & Availability of B82422H1222K000

	To Download B82422H1222K000 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .